|
|
|
|
 | 5305-00-007-0317 | SCREW,CAP,SOCKET HEAD | 06/25/1972 |
|
 | 5305-00-007-0317 | SCREW,CAP,SOCKET HEAD | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | M60HS624-22N | NYLOK LLC | 26233 | | 2420750 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY | 10001 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 1.360 INCHES MINIMUM AND 1.405 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.550 INCHES MINIMUM AND 0.563 INCHES MAXIMUM | | HEAD HEIGHT | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | LOCKING FEATURE | PELLET THREADS | | INTERNAL DRIVE STYLE | HEXAGON | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | T | ACQUISITION OF THIS PART IS CONTROLLED BY QPL PROCEDURES. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | SCREW, SELF-LOCKING STEEL, NICKEL PLD 10001 NAV ORD SYS CMD WASH D C SOURCE OF SUPPLY NYLOK CO PARAMUS N J (02615) P/N M60HS624-22N ************************************************ QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/ QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT OCTOBER 1999) FOR FSC'S 5305, 5306, 5307 AND 5310 (NUTS). ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION (CLASS 2 FASTENERS). SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION. ANY BID/QUOTE/OFFER/BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR. ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND DLAD 52.246-9064, IF REFERENCED, DO NOT APPLY. FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE: http://www.troopsupport.dla.mil/ce/qsl/ -OR- WRITE TO: DLA TROOP SUPPORT ATTN: DLA TROOP SUPPORT - NASA, BLDG 6/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092 ************************************************ THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS. . THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL APPROVED AT THE TIME OF THE CONTRACT AWARD. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". | | Cage# 26233 and PartNumber# M60HS624-22N |
|
|
|
|
|
|
|
|
|