| SPLINE LENGTH | 0.625 INCHES NOMINAL |
| DRIVE SHAFT GOVERNMENT STANDARD | AND10262 |
| SHAFT PROTRUSION LENGTH | 1.000 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. C TO C |
| MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM B52 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | MF30-3915-30S212-2 |
| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND |
| COUNTERCLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 2820.0 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 1.519 CUBIC INCHES |
| CONNECTION TYPE | DRAIN |
| INLET |
| OUTLET |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 4 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| SURFACE TREATMENT | ANODIZE HOUSING |
| MOUNTING GOVERNMENT STANDARD | AND10621 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| TORQUE LOAD RATING | 725.0 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-6,AND10050-10 AND AND10050-10 |
| THREAD SIZE | 0.563-18 AND |
| 0.875-14 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SPLINE QUANTITY | 16 |
| SPLINE MAJOR DIAMETER | 0.727 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.867 INCHES NOMINAL |
| SPLINE PITCH | 20/30 |
| PITCH DIAMETER | 0.800 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |