| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.000 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 60.200 CUBIC INCHES |
| CONNECTION TYPE | DRAIN |
| INLET |
| OUTLET |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 3 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| SURFACE TREATMENT | ANODIZE HOUSING |
| MOUNTING GOVERNMENT STANDARD | AND 10261 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 1500 PSI AT MINUS 65 DEG F TO PLUS 160 DEG F |
| TORQUE LOAD RATING | 60.200 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-4; AND 10050-8; AND 10050-8 |
| THREAD SIZE | 0.438-20 AND |
| 0.750-16 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SPLINE QUANTITY | 12 |
| SPLINE MAJOR DIAMETER | 0.6360 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.5360 INCHES NOMINAL |
| SPLINE PITCH | 20/40 |
| PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.000 |
| SPLINE LENGTH | 0.812 INCHES NOMINAL |
| DRIVE SHAFT GOVERNMENT STANDARD | AND 10261 |
| SHAFT PROTRUSION LENGTH | 1.060 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. C TO C |
| MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | MF10-711-30S296-4 |