|
|
|
National Stock Number:
1650-00-580-6451
Federal Supply Class:
1650
National Item Identification Number:
005806451
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 52625-6 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| BODY DIAMETER | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 1.250 INCHES MINIMUM AND 1.266 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.000 INCHES MINIMUM AND 7.062 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 1.924 SQUARE FEET | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MATERIAL | PLASTIC OR CELLULOSE FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 160.0 FAHRENHEIT MAXIMUM |
|
|