| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-8 AND MS33649-8 AND MS33649-4 |
| CONNECTION QUANTITY | 3 |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.367 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL |
| MOUNTING GOVERNMENT STANDARD | AND10261 |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3850.0 |
| PITCH DIAMETER | 0.600 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 0.906 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.664 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.550 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE PITCH | 20/40 |
| SPLINE QUANTITY | 12 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.750-16 AND 0.438-20 |
| TORQUE LOAD RATING | 175.2 INCH-POUNDS |