| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-6 |
| CONNECTION QUANTITY | 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.095 CUBIC INCHES |
| CONNECTION TYPE | DRAIN |
| DEPARTURE FROM CITED DOCUMENT | NRQE |
| DISPLACEMENT TYPE | CONSTANT |
| DRIVE SHAFT GOVERNMENT STANDARD | AND10260 |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| MATERIAL | ALUMINUM HOUSING |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. C TO C |
| MOUNTING GOVERNMENT STANDARD | AND10260 |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3000.0 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 1.060 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SPLINE LENGTH | 0.672 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.4063 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.3466 INCHES NOMINAL |
| SPLINE PITCH | 32/64 |
| SPLINE QUANTITY | 12 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 7/16-20 |
| TORQUE LOAD RATING | 45.0 INCH-POUNDS |