| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END TYPE | FLANGED |
| FLANGE HOLE TAPER | 6.000 INCHES NOMINAL PER FOOT |
| FLANGE OVERALL THICKNESS | 1.285 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.410 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
| FSC APPLICATION DATA | AXLE ASSY,AMERICAN COLEMAN CO. PART NO. 668-37,COLEMAN G40 TRACTOR,WHEELED |
| OVERALL LENGTH | 37.050625 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4150 ASSN STD 1ST MATERIAL RESPONSE OR SAE 4340 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4150 OR STEEL COMP 4340 |
| METALLIC HARDNESS RATING | 40.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| SECOND END FACILITY DIAMETER | 1.937 INCHES NOMINAL |
| SECOND END FACILITY LOCATION | LOCATED 18-1/64 IN. FROM SHAFT SPLINED END |
| SECOND END FACILITY WIDTH | 1.500 INCHES NOMINAL |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |
| SECOND END PITCH DIAMETER | 1.671 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.188 INCHES NOMINAL |
| TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |