| DRAG LINK END CHARACTERISTIC | W/BALL STUD BORE |
| BORE LENGTH | 1.125 INCHES NOMINAL |
| BORE SMALLEST DIAMETER | 0.713 INCHES NOMINAL |
| BORE TAPER | 1.500 PER FOOT IN INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 5.469 INCHES MINIMUM AND 5.531 INCHES MAXIMUM |
| COUNTERBORE FEATURE | NOT INCLUDED |
| DESIGN TYPE | OFFSET |
| SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 1.125 INCHES MINIMUM AND 1.172 INCHES MAXIMUM |
| SECTOR SHAFT MOUNTING END OVERALL WIDTH | 2.438 INCHES NOMINAL |
| SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| SERRATION INCLUDED ANGLE IN DEG | 90.000 |
| SMALL END MAJOR DIAMETER | 1.412 INCHES MINIMUM AND 1.414 INCHES MAXIMUM |
| SMALL END TEETH DEPTH | 0.0531 INCHES NOMINAL |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN 39 SEC |
| TAPER LENGTH | 1.000 INCHES NOMINAL |
| TEETH QUANTITY | 32 |