|
|
|
National Stock Number:
2815-00-004-2543
Federal Supply Class:
2815
National Item Identification Number:
000042543
Description:
ENGINE,DIESEL
Detail:
A RECIPROCATING INTERNAL COMBUSTION ENGINE IN WHICH THE POWER NECESSARY TO PRODUCE MOTION OF THE MECHANISM IS OBTAINED BY IGNITING A COMPRESSED FUEL AND AIR MIXTURE WITHIN THE CYLINDER OR CYLINDERS BY EXTREME HEAT RESULTING FROM COMPRESSION. THE ENGINE CONSISTS OF A CYLINDER BLOCK ASSEMBLY COMPLETE WITH CYLINDER HEAD(S) AND OIL PAN(S). IT MAY INCLUDE ATTACHMENTS OR ACCESSORIES, SUCH AS STARTER MOTOR, TRANSMISSION FOR AUXILIARY EQUIPMENT, CLUTCH, OIL FILTER, FLYWHEEL, FLYWHEEL HOUSING OR BATTERY CHARGING GENERATOR. A FUEL TANK IS NOT INCLUDED. FOR A COMPLETE OPERATING POWER UNIT MOUNTED ON A BASE, SEE POWER UNIT (1), DIESEL.
|
Manufacturer Information:
| 1062-4001 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5137173 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC |
|
Techincal Specification:
| ACCESSORY COMPONENTS AND QUANTITY | AIR INTAKE SILENCER 1; BASE,MOUNTING 1; COLD STARTING DEVICE 1; COOLER,FRESH WATER 1; COOLER,LUBE OIL 1; COOLER,LUBE OIL REV/RED GEAR 1; FILTER,FUEL 1; FILTER,LUBE OIL 1; FILTER,LUBE OIL REV/RED GEAR 1; GOVERNOR,SPEED REGULATING 1; PUMP,FRESH WATER 1; PUMP,FUEL SUPPLY 1; PUMP,LUBE OIL 1; PUMP,LUBE OIL REV/RED GEAR 1; PUMP,RAW WATER 1; OVERSPEED TRIP DEVICE 1; STRAINER,FUEL 1; TANK,EXPANSION,WATER 1 | | CRANKSHAFT ROTATION DIRECTION | CLOCKWISE | | CYLINDER ARRANGEMENT | STRAIGHT IN-LINE | | CYLINDER QUANTITY | 6 | | FORWARD SPEED QUANTITY PER RANGE | 1 | | MAIN POWER TAKEOFF ROTATION DIRECTION | COUNTERCLOCKWISE | | SPECIAL FEATURES | 80MM INJECTORS; FLEXIBLE STAINLESS BRAID COVERED,STAINLESS COIL REINFORCED POLYTETRAFLUOROETHYLENE LUBE OIL HOSE; OIL PAN FOR 16 DEG MAXIMUM INSTALLATION ANGLE; PROPELLER SHAFT COMPANION FLANGE | | PISTON ACTION TYPE | SINGLE ACTING | | REDUCTION GEAR RATIO | 1.5 TO 1 | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE CRANKSHAFT ROTATION DIRECTION,ACCESSORY COMPONENTS AND QUANTITY,SPECIAL FEATURES REQUIREMENTS | | REVERSE SPEED QUANTITY | 1 | | SPEED RANGE QUANTITY | 1 | | STARTING METHOD | ELECTRICAL | | STANDARD BORE DIAMETER | 4.250 INCHES | | STROKE LENGTH | 5.000 INCHES | | STROKES PER CYCLE | 2 | | TRANSMISSION TYPE | HYDRAULICALLY ACTUATED | | VOLTAGE IN VOLTS | 24.0 |
|
|