| DISTANCE FROM END TO KEYWAY CENTER | 0.557 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.905 INCHES MINIMUM AND 7.929 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY |
| GROUNDING METHOD | EXTERNAL |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| RECTIFIER LOCATION | SEPARATE |
| SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.430 INCHES NOMINAL |
| THREAD SERIES | UN |
| THREAD QUANTITY PER INCH | 20 |
| UNTHREADED PORTION LENGTH | 0.750 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| VOLTAGE IN VOLTS | 12.0 |