1670-00-294-3910 PARACHUTE,PERSONNEL,SEAT Index 2920-00-294-3915 GENERATOR,ENGINE ACCESSORY

National Stock Number:
2920-00-294-3913

Federal Supply Class:
2920

National Item Identification Number:
002943913

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110652016764GENERAL MOTORS CORP DELCO REMY DIV
11065201LW55BORGWARNER PDS (ANDERSON), L.L.C.
110652024617GENERAL MOTORS CORP
110652061928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT


Techincal Specification:
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1125
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH2.250 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER1.109 INCHES NOMINAL
DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER2.250 INCHES NOMINAL
DISTANCE FROM SHAFT CENTERLINE TO MOUNTING FLANGE SURFACE3.125 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FUNGUS RESISTANT
FURNISHED ITEMSCOOLING FAN AND WOODRUFF KEY
KEYWAY WIDTH0.156 INCHES NOMINAL
KEYWAY LENGTH0.750 INCHES NOMINAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS10.0
MAXIMUM RATED ARMATURE SPEED IN RPM3000
MINIMUM CURRENT CUT-IN SPEED IN RPM975
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH16
MOUNTING HOLE THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MOUNTING STYLEBASE FLANGED MTD W/ FOUR THREADED MTG HOLES
SECOND STEP DIAMETER0.874 INCHES NOMINAL
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
SUBMERSIBILITYNONSUBMERSIBLE
THREAD CLASS2A
THREAD DIAMETER0.625 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH18
THREAD SERIESUNF
UNTHREADED PORTION LENGTH1.312 INCHES NOMINAL
VOLTAGE IN VOLTS24.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us