| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 190.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 4.250 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.500 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.875 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| GROUNDING METHOD | INTERNAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 3600 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 580 |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE QUANTITY | 6 |
| SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| SPLINE LENGTH | 2.000 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.844 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES | UNF |
| TOP MOUNTING HOLE DIAMETER | 0.531 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 12.0 |