| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 27.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 220.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 5.678 INCHES MINIMUM AND 5.693 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.745 INCHES MINIMUM AND 5.776 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM |
| DISTANCE FROM END TO KEYWAY CENTER | 0.789 INCHES NOMINAL |
| KEYWAY LENGTH | 0.500 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SECOND STEP DIAMETER | 0.590 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.437 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.492 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 20 |
| UNTHREADED PORTION LENGTH | 0.708 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 12.0 |