| ATTACHMENT METHOD | MOUNTING HOLE |
| BACKLASH DESIGNATION | GRADE A |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.245 INCHES FIRST END |
| END NOMINAL LENGTH | 0.138 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.257 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB |
| MATERIAL | STEEL COMP 302 BODY |
| MATERIAL | STEEL COMP 303 HUB |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH HUB, SECOND END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES AXIALLY THROUGH HUB, SECOND END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.032 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.169 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.276 INCHES |
| PITCH DIAMETER | 1.2500 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 80 |
| TOOTH FORM | STANDARD |