|
|
|
National Stock Number:
3020-00-052-5596
Federal Supply Class:
3020
National Item Identification Number:
000525596
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 1340065 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1340065-99 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | L310014319 | 14867 | WEST BEND OF CANADA LTD | | L310014-319 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BACKLASH DESIGNATION | GRADE C | | BORE NOMINAL DIAMETER | 0.1875 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.271 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.125 INCHES | | HUB STYLE DESIGNATOR | SPLIT SECOND END | | HUB NOMINAL DIAMETER | 0.248 INCHES FIRST END | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.302 INCHES FIRST END | | PITCH DIAMETER | 1.0305 INCHES MINIMUM AND 1.0312 INCHES MAXIMUM | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 12 | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | TEETH QUANTITY | 99 | | TOOTH FORM | STANDARD |
|