| MATERIAL | STEEL COMP 303 BODY |
| COPPER ALLOY CLUTCH PLATE |
| STEEL COMP 303 HUB |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MIL-B-5687,TYPE 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE CLUTCH PLATE |
| MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE HUB |
| SURFACE TREATMENT | PASSIVATE BODY |
| PASSIVATE HUB |
| TEETH QUANTITY | 80 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| TORQUE CAPACITY | 16.00 INCH-OUNCES MAXIMUM |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR |
| QUALITY NUMBER 11 |
| STYLE DESIGNATOR | ADJUSTABLE TORQUE, COIL SPRING LOADED |
| PITCH DIAMETER | 1.2500 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.562 INCHES |
| NOMINAL OUTSIDE DIAMETER | 1.2813 INCHES |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.218 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.219 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND |
| 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.047 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 01351 |
| DESIGN CONTROL REFERENCE | MSC250-80S1873 |