|
|
|
National Stock Number:
3020-00-253-4350
Federal Supply Class:
3020
National Item Identification Number:
002534350
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 607721 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 607721 | 7X677 | GENERAL MOTORS LLC | | 7005126 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | EA2424 | 1DF03 | ABM EQUIPMENT, LLC | | EA7315 | 1DF03 | ABM EQUIPMENT, LLC |
|
Techincal Specification:
| BODY STYLE | WEBBED, OFFSET, SOLID | | BORE NOMINAL DIAMETER | 2.7215 INCHES BOTH ENDS | | BORE STYLE | W/ 2 KEYWAYS BOTH ENDS | | FACE NOMINAL WIDTH | 1.8750 INCHES | | HARDNESS RATING | 53.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 3.3750 INCHES SECOND END | | HUB NOMINAL DIAMETER | 3.5000 INCHES FIRST END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | KEYWAY NOMINAL WIDTH | 0.3750 INCHES BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1515 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8630 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.3125 INCHES SECOND END | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.4415 INCHES BOTH ENDS | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.2812 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 8.1000 INCHES | | NOMINAL OVERALL LENGTH | 2.5630 INCHES | | PITCH ANGLE | 66.7998 DEGREES | | PITCH DIAMETER | 7.0000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB PROTRUDING, BACK HUB RECESSED | | TEETH QUANTITY | 28 | | TEETH TYPE | STRAIGHT |
|
|