|
|
|
National Stock Number:
3020-00-294-9612
Federal Supply Class:
3020
National Item Identification Number:
002949612
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| A3889W179 | 18859 | DUPLEX DIV WARNER AND SWASEY CO | | A3889W179 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| BODY STYLE | WEBBED, OFFSET, SOLID | | BORE NOMINAL DIAMETER | 2.638 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | FACE NOMINAL WIDTH | 1.750 INCHES | | HUB NOMINAL DIAMETER | 3.625 INCHES FIRST END | | HUB NOMINAL DIAMETER | 4.750 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.234 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.562 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER | 7.7300 INCHES | | NOMINAL OVERALL LENGTH | 2.375 INCHES | | PITCH ANGLE | 67.7500 DEGREES | | PITCH DIAMETER | 8.7300 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | 1/8 IN. 45 DEG CHAMFER ON SPLINE ENDS ON FIRST END OF GEAR,1/8 IN. BY 45 DEG CHAMFER ON HUB ON BACK SIDE OF GEAR,3/16 IN. BY 45 DEG CHAMFER ON HUB ON FIRST END OF GEAR | | SPLINE PITCH DIAMETER | 2.4600 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 9 BOTH ENDS | | STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS | | TEETH QUANTITY | 22 | | TEETH TYPE | SPIRAL | | TOOTH DIRECTION | LEFT |
|
|