| MATERIAL | STEEL OVERALL |
| TEETH QUANTITY | 66 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH FORM | STANDARD |
| TOOTH DIRECTION | RIGHT |
| PRESSURE ANGLE | 20.0000 DEGREES |
| HELIX ANGLE | 20.3166 DEGREES |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| PITCH DIAMETER | 7.0378 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 7.3320 INCHES |
| FACE NOMINAL WIDTH | 0.500 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0920 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.1400 INCHES SECOND END |
| BORE STYLE | W/ KEYWAY BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.1875 INCHES BOTH ENDS |
| KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.7212 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| HUB NOMINAL DIAMETER | 1.9200 INCHES FIRST END |
| 1.7600 INCHES SECOND END |
| BODY STYLE | WEBBED, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.3120 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 AXIALLY THROUGH BODY, FIRST END |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 6.561 INCHES AXIALLY THROUGH BODY, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 72582 |
| DESIGN CONTROL REFERENCE | 5126904 |