| MATERIAL | STEEL COMP 1213 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI B1113,1213/SAE 1113 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 18 |
| TEETH TYPE | SPIRAL |
| TOOTH DIRECTION | RIGHT |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PITCH ANGLE | 40.0000 DEGREES |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.562 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.7968 INCHES |
| FACE NOMINAL WIDTH | 0.159 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES SECOND END |
| BODY RECESS NOMINAL DEPTH | 0.0625 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE NOMINAL DEPTH | 0.500 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| HUB NOMINAL DIAMETER | 0.562 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.190 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| SPECIAL FEATURES | 0.187 IN. FROM FIRST END OF HUB TO C OF TAPPED HOLE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 82423 |
| DESIGN CONTROL REFERENCE | 52523 |