| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-11415 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE OVERALL |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND |
| 35.0 ROCKWELL C MAXIMUM OVERALL |
| TEETH QUANTITY | 56 |
| TOOTH FORM | STUB |
| PRESSURE ANGLE | 20.0000 DEGREES |
| BACKLASH DESIGNATION | GRADE E |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| PITCH DIAMETER | 14.0000 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 2.995 INCHES |
| NOMINAL OUTSIDE DIAMETER | 14.397 INCHES |
| FACE NOMINAL WIDTH | 2.090 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.505 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.500 INCHES SECOND END |
| BORE STYLE | W/ 3 KEYWAYS BOTH ENDS |
| BORE NOMINAL DIAMETER | 3.812 INCHES BOTH ENDS |
| KEYWAY NOMINAL WIDTH | 0.748 INCHES BOTH ENDS |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 2.226 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| HUB NOMINAL DIAMETER | 5.375 INCHES FIRST END |
| 5.375 INCHES SECOND END |
| BODY STYLE | WEBBED, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 8 THREADED AXIALLY THROUGH BODY, FIRST END |
| 2 THREADED AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY, FIRST END |
| UNF AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.190 INCHES AXIALLY THROUGH BODY, FIRST END |
| 0.190 INCHES AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 AXIALLY THROUGH BODY, FIRST END |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 12.875 INCHES AXIALLY THROUGH BODY, FIRST END |
| 7.000 INCHES AXIALLY THROUGH BODY, SECOND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19204 |
| DESIGN CONTROL REFERENCE | 5507143 |