| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| FURNISHED ITEMS AND QUANTITY | 1 SETSCREW |
| FACE NOMINAL WIDTH | 0.187 INCHES |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.047 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.666 INCHES |
| NOMINAL OVERALL LENGTH | 0.437 INCHES |
| PITCH DIAMETER | 0.6243 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MTG HOLES 90 DEGS APART |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE HUB |
| SURFACE TREATMENT | ANODIZE BODY |
| SURFACE TREATMENT | ANODIZE HUB |
| TEETH QUANTITY | 30 |
| TOOTH FORM | STANDARD |