| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.187 INCHES |
| HELIX ANGLE | 45.0000 DEGREES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| III MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| PITCH DIAMETER | 0.8828 INCHES MINIMUM AND 0.8838 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.924 INCHES |
| SPECIAL FEATURES | ONE SETSCREW FURNISHED |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 30 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | LEFT |
| TOOTH FORM | STANDARD |