| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE STYLE | PARTIAL W/COUNTERBORE FIRST END |
| BORE STYLE | THREAD SERIES DESIGNATOR PARTIALLY THREADED SECOND END |
| BORE NOMINAL DEPTH | 1.800 INCHES FIRST END |
| BORE NOMINAL DIAMETER | 0.920 INCHES FIRST END |
| COUNTERBORE NOMINAL DEPTH | 0.800 INCHES FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 1.120 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.380 INCHES |
| HARDNESS RATING | 80.0 ROCKWELL A MINIMUM TEETH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| HUB SPLINE PITCH DIAMETER | 1.1875 INCHES NOMINAL SECOND END |
| HUB SPLINE QUANTITY | 19 SECOND END |
| HUB STYLE DESIGNATOR | EXTERNALLY SPLINED, INVOLUTE SPLINES SECOND END |
| III MATERIAL | STEEL COMP E9310 OVERALL |
| PITCH DIAMETER | 2.0000 INCHES NOMINAL |
| PITCH ANGLE | 45.0000 DEGREES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.250 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 2.115 INCHES |
| NOMINAL OVERALL LENGTH | 2.650 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES SECOND END |
| NOMINAL THREAD LENGTH | 0.850 INCHES SECOND END |
| SPECIAL FEATURES | SECOND END BORE THD 0.850 IN. DEEP,3/4-16UNF |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| TEETH QUANTITY | 24 |
| TEETH TYPE | STRAIGHT |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |
| TOOTH DIRECTION | RIGHT |