| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.120 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.120 INCHES |
| HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PITCH ANGLE | 45.0000 DEGREES |
| PITCH DIAMETER | 0.3330 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.350 INCHES |
| NOMINAL OVERALL LENGTH | 0.341 INCHES |
| SPECIAL FEATURES | ONE SUB-DRILL POINT AT APPROXIMATELY 90 DEG FROM SET SCREW HOLE |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 24 |
| TEETH TYPE | SKEW |