|
|
|
National Stock Number:
3040-00-010-8107
Federal Supply Class:
3040
National Item Identification Number:
000108107
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 1770719-20 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1770719-20 | 56232 | LOCKHEED MARTIN CORPORATION | | 41-513-20 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.050 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0170 INCHES MINIMUM AND 0.0190 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 2.400 INCHES NOMINAL | | MATERIAL | STEEL COMP 416 | | SECOND END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.0735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0170 INCHES MINIMUM AND 0.0190 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.260 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SURFACE FINISH | 32.0 MICROINCHES |
|
|