|
|
|
National Stock Number:
3040-00-562-0444
Federal Supply Class:
3040
National Item Identification Number:
005620444
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8332614 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | HCF2251C | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | HCF2251C | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.8765 INCHES MINIMUM AND 2.8775 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.496 INCHES MINIMUM AND 3.497 INCHES MAXIMUM | | OVERALL LENGTH | 10.157 INCHES MINIMUM AND 10.219 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4340H | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.968 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL | | SECOND END DIAMETER | 1.4920 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.281 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | STEP QUANTITY | 6 | | SPECIAL FEATURES | SECOND END THERE IS NO DISTANCE BTWN HOLE CENTERS |
|
|