|
|
|
National Stock Number:
3040-00-562-8144
Federal Supply Class:
3040
National Item Identification Number:
005628144
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5628144 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 900789 | 58275 | SASCO INC CANADIAN DIV | | T84J2 | 79410 | LIBERTY VENTURES INTI LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5960 INCHES MINIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | TRANSMISSION MAIN SHAFT,CARRIER,CARGO | | LARGEST STEP DIAMETER | 1.3735 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM | | OVERALL LENGTH | 10.937 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 3.875 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.500 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.0620 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1090 INCHES NOMINAL | | SECOND END DIAMETER | 1.1808 INCHES MINIMUM AND 1.1812 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 3.437 INCHES MINIMUM AND 3.483 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.0230 INCHES MINIMUM | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | CIRCULAR GROOVED, WOODRUFF KEYWAY AND SPLINED (STRAIGHT) | | SECOND END KEYWAY WIDTH | 0.1250 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 3.437 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.1750 INCHES MINIMUM | | STEP QUANTITY | 5 |
|
|