|
|
|
National Stock Number:
3040-00-563-5316
Federal Supply Class:
3040
National Item Identification Number:
005635316
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1887687 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1887687 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1887687 | 24617 | GENERAL MOTORS CORP | | 1887687 | 7X677 | GENERAL MOTORS LLC | | 21606 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 21606 | 99551 | GOODRICH CORPORATION | | A162654 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.078 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.250 INCHES NOMINAL | | FIRST END DIAMETER | 0.5900 INCHES MINIMUM AND 0.5903 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.0730 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM COMPONENTS,NON-AIRCRAFT | | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 5.000 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 90 DEG ANGLE BETWEEN KEYWAYS AND DRILLED HOLES; 2.094 IN. BETWEEN GROOVE CENTERS | | SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.985 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.953 INCHES NOMINAL | | SECOND END DIAMETER | 0.5240 INCHES MINIMUM AND 0.5245 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.438 INCHES NOMINAL | | SECOND END STYLE | TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE | | SECOND END KEYWAY DEPTH | 0.062 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.1240 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM | | STEP QUANTITY | 5 |
|
|