|
|
|
National Stock Number:
3040-00-563-9463
Federal Supply Class:
3040
National Item Identification Number:
005639463
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 0E73 | 92392 | ALLIS-CHALMERS CORP | | 5639463 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.3580 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 3.875 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.3580 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 2.0480 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 16 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FSC APPLICATION DATA | DIFFERENTIAL FINAL DRIVE,TRACTOR FULL TRACKED HIGH SPEED | | LARGEST STEP DIAMETER | 2.495 INCHES NOMINAL | | OVERALL LENGTH | 28.280 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI OR SAE 8650H ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END HOLE DIAMETER | 1.1250 INCHES NOMINAL | | SECOND END DIAMETER | 2.3580 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.0480 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 3.750 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.3580 INCHES NOMINAL | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|