|
|
|
National Stock Number:
3040-01-254-3008
Federal Supply Class:
3040
National Item Identification Number:
012543008
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5541232 | 81039 | WHIPPANY ACTUATION SYSTEMS, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2340 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.080 INCHES NOMINAL | | FIRST END STYLE | TONGUE ROUNDED ENDS | | FIRST END TONGUE THICKNESS | 0.245 INCHES NOMINAL | | FIRST END TONGUE WIDTH | 0.416 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.560 INCHES NOMINAL | | OVERALL LENGTH | 4.330 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.2803 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.080 INCHES NOMINAL | | SECOND END STYLE | TONGUE ROUNDED ENDS | | SECOND END TONGUE THICKNESS | 0.245 INCHES NOMINAL | | SECOND END TONGUE WIDTH | 0.416 INCHES NOMINAL | | SPECIAL FEATURES | ONE STEP IS CHAMFERED .02 X 45 DEG | | STEP QUANTITY | 7 |
|
|