3040-01-497-0341, SHAFT,SHOULDERED

5975-01-497-0342 DRAWER,ELECTRICAL EQUIPMENT

National Stock Number:
3040-01-497-0341

Federal Supply Class:
3040

National Item Identification Number:
014970341

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

4101106 FIND 121	59364	HONEYWELL INTERNATIONAL INC.
4101107-1 FIND 7	59364	HONEYWELL INTERNATIONAL INC.
4102432-1	59364	HONEYWELL INTERNATIONAL INC.
4102432-1	78062	SARGENT AEROSPACE & DEFENSE, LLC

Techincal Specification:

END SIMILARITY	IDENTICAL
FIRST END DIAMETER	0.6800 INCHES MINIMUM AND 0.6850 INCHES MAXIMUM
FIRST END PITCH DIAMETER	0.0010 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH	0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER	0.6800 INCHES MINIMUM AND 0.6850 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER	0.5760 INCHES MINIMUM AND 0.5860 INCHES MAXIMUM
FIRST END SPLINE QUANTITY	13
FIRST END STYLE	SPLINED (INVOLUTE)
LARGEST STEP DIAMETER	1.045 INCHES MINIMUM AND 1.055 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6265 NATIONAL SPEC ALL MATERIAL RESPONSES
MATERIAL	STEEL
PART NAME ASSIGNED BY CONTROLLING AGENCY	SHAFT, QUILL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	3.315 INCHES MINIMUM AND 3.525 INCHES MAXIMUM
SECOND END DIAMETER	0.6800 INCHES MINIMUM AND 0.6850 INCHES MAXIMUM
SECOND END STYLE	SPLINED (INVOLUTE)
SECOND END PITCH DIAMETER	0.0010 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH	0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER	0.6800 INCHES MINIMUM AND 0.6850 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	0.5760 INCHES MINIMUM AND 0.5860 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	13
STEP QUANTITY	7

Click here to Register for Free 30-day Trial