3040-01-506-0500, COLLAR,SHAFT

National Stock Number:
3040-01-506-0500

Federal Supply Class:
3040

National Item Identification Number:
015060500

Description:
COLLAR,SHAFT

Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

Manufacturer Information:

743235

99167

HAMILTON SUNDSTRAND CORPORATION

Techincal Specification:

ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	180.0
BORE DIAMETER	0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
HOLE DIAMETER AND LOCATION	0.2000 INCHES MINIMUM ALL HOLES AND 0.2400 INCHES MAXIMUM ALL HOLES
LARGEST DIAMETER LENGTH	0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
MATERIAL	PLASTIC POLYAMIDE
III PART NAME ASSIGNED BY CONTROLLING AGENCY	COLLAR ASSY
III SUPPLEMENTARY FEATURES	TWO SECURING HOLES,.200 DIA X 120 DEG. CSKUSES .1640-32 HELICAL COIL INSERTS STOCKLISTED ON NSN 5325-00-631-7891 USING TWO 8-32 SCREWS
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE DIAMETER	1.209 INCHES MINIMUM AND 1.229 INCHES MAXIMUM
SECURING HOLE QUANTITY	2
SECURING HOLE TYPE AND LOCATION	UNTHREADED ALL HOLES
SMALL END DIAMETER	0.943 INCHES MINIMUM AND 0.963 INCHES MAXIMUM
SPECIAL FEATURES	MATT L-P-395 STOCKLISTED ON NSN9330-01-495-1714;ITEM HAS LIP ON ONE END REDUCING BORE DIA TO 0.666 IN
STYLE DESIGNATOR	ROUND STEPPED
THICKNESS	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM

Click here to Register for Free 30-day Trial