| MATERIAL | STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP E52100 OUTER RING |
| STEEL RETAINER |
| RUBBER SYNTHETIC SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 16.0 MILLIMETERS NOMINAL |
| BORE DIAMETER | 10.0 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 26.0 MILLIMETERS NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0004 INCHES MINIMUM RADIAL AND |
| 0.0010 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | BEARINGS STABILIZED FOR OPERATIONAT M 65 TO P 250 DEG F,LUBRICATION QUANTITY 30 TO 50 PCT FULL |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 78286 |
| MFR SOURCE CONTROLLING REFERENCE | SB1133-1 |