|
|
|
National Stock Number:
3110-00-076-1411
Federal Supply Class:
3110
National Item Identification Number:
000761411
Description:
PLATE,RETAINING,BEARING
Detail:
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
|
Manufacturer Information:
| 11687110 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | STYLE DESIGNATOR | FOUR FLATS | | OUTSIDE DIAMETER | 2.840 INCHES MINIMUM AND | | 2.900 INCHES MAXIMUM | | LENGTH ACROSS FLATS | 2.420 INCHES NOMINAL | | WIDTH ACROSS FLATS | 2.420 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/ APERTURE | | APERTURE DIAMETER | 1.265 INCHES MINIMUM AND | | 1.280 INCHES MAXIMUM | | OVERALL THICKNESS | 0.273 INCHES MINIMUM AND | | 0.289 INCHES MAXIMUM | | OUTSIDE RAISED SURFACE DIAMETER | 1.720 INCHES MINIMUM AND | | 1.780 INCHES MAXIMUM | | RAISED SURFACE HEIGHT | 0.094 INCHES NOMINAL | | MOUNTING HOLE TYPE | ROUND, UNTHREADED, COUNTERBORED | | MOUNTING HOLE DIAMETER | 0.206 INCHES MINIMUM AND | | 0.212 INCHES MAXIMUM | | COUNTERBORE DEPTH | 0.324 INCHES NOMINAL | | COUNTERBORE DIAMETER | 0.324 INCHES NOMINAL | | MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES | | DISTANCE BETWEEN HOLES ALONG LENGTH | 1.722 INCHES NOMINAL | | DISTANCE BETWEEN HOLES ALONG WIDTH | 1.722 INCHES NOMINAL | | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.861 INCHES NOMINAL | | DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.861 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 11687110 |
|
|