3120-00-180-7029, BUSHING,SLEEVE

National Stock Number:
3120-00-180-7029

Federal Supply Class:
3120

National Item Identification Number:
001807029

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

6430-80151-104

78286

SIKORSKY AIRCRAFT CORPORATION

Techincal Specification:

BODY INSIDE DIAMETER	0.3125 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.4381 INCHES MINIMUM AND 0.4386 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER	0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM
FLANGE WIDTH	0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-T-6736 COM+4130 TYPE 1,COND N MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 CONDN MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4130 OVERALL
OVERALL LENGTH	0.2850 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH	125.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE 2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial