|
|
|
National Stock Number:
3120-00-922-1479
Federal Supply Class:
3120
National Item Identification Number:
009221479
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| A51C43590-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51C43590-13 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51C43590-13 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.3660 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.5003 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM | | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE INSIDE LEFT CORNER | | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE LEFT FLANGE BODY CORNER | | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | FLANGE OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL | | FLANGE WIDTH | 0.0610 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OR STEEL COMP E4340 OVERALL | | OVERALL LENGTH | 0.1760 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE FINISH | 125.0 MICROINCHES INTERMEDIATE LAYER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|