| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SURFACE TREATMENT | ANODIZE INSIDE DIAMETER SURFACE OF BODY |
| CHROMATE LEFT END SURFACE OF BODY AND FLANGE |
| CHROMATE RIGHT END SURFACE OF BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 3 CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
| OVERALL LENGTH | 2.1870 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 1.0500 INCHES MINIMUM AND |
| 1.0510 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 0.8000 INCHES MINIMUM AND |
| 0.8020 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.0600 INCHES MINIMUM AND |
| 1.0700 INCHES MAXIMUM |
| FLANGE WIDTH | 0.2300 INCHES MINIMUM AND |
| 0.2600 INCHES MAXIMUM |
| CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| CHAMFERED OUTSIDE RIGHT CORNER |
| SQUARE INSIDE RIGHT CORNER |
| CHAMFERED INSIDE LEFT CORNER |
| ROUND LEFT FLANGE OUTSIDE RIGHT CORNER |
| ROUND LEFT FLANGE BODY CORNER |
| SPECIAL FEATURES | ONE GROVE 0.210 IN. W BY 0.055 IN. DP 0.750 IN. FROM 1ST END,0.020 IN. RADIUS GROVE BOTTOM CORNERS; TWELVE EQUALLY SPACED 0.035 IN. W BY 0.094 IN. DP SLOTS ON 1ST END FACE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 58163 |
| DESIGN CONTROL REFERENCE | H330044P01 |