|
|
|
National Stock Number:
4330-00-570-0240
Federal Supply Class:
4330
National Item Identification Number:
005700240
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 23755E-10 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 23755E25 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 36B510439P1 | 30221 | GENERAL ELECTRIC CO ARMAMENT AND ELECTRICAL SYSTEMS DEPT ELECTRICAL SYSTEMS PRODUCTS DEPT | | 7582150 | 05228 | PTI TECHNOLOGIES INC. |
|
Techincal Specification:
| BODY DIAMETER | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.678 INCHES MINIMUM AND 0.684 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM | | DESIGN TYPE | LIMITED | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | PARALLEL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
|
|