| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 42.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 254.0 |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.789 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 280.0 |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| UNJ 2ND END |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| 1.062 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-25579 GOVERNMENT SPECIFICATION AND |
| 96906-MS8005 GOVERNMENT STANDARD |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-25579 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS8005K420E280 |