| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 34.750 INCHES MINIMUM WORKING AND |
| 35.250 INCHES MAXIMUM WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 50.8 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED WIRE AND |
| 1ST LAYER BRAIDED COTTON CORD AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| INSIDE DIAMETER | 0.313 INCHES MINIMUM AND |
| 0.344 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.656 INCHES MINIMUM AND |
| 0.670 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| 45.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 45.0 |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNJ 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| 18 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 26512 |
| DESIGN CONTROL REFERENCE | 37F39282-1 |