|
|
|
National Stock Number:
4730-00-017-8887
Federal Supply Class:
4730
National Item Identification Number:
000178887
Description:
ELBOW,TUBE TO HOSE
Detail:
A FITTING THAT FORMS AN ANGLE OF LESS THAN 180 DEGREES (3.141 RADIANS) FROM A STRAIGHT FLOW. ONE CONNECTING END HAS MACHINE THREADS (STRAIGHT THREADS OTHER THAN PIPE OR HOSE SERIES) DESIGNED TO ACCOMMODATE A TUBE, OR IS UNTHREADED AND DESIGNED TO ACCOMMODATE A TUBE, THE OTHER END HAS STANDARD HOSE THREADS, AN INCOMPLETE PART OF A THREADED END CONNECTION THAT GRIPS THE HOSE DIRECTLY, OR IS UNTHREADED AND DESIGNED TO ACCOMMODATE A HOSE. IT MAY HAVE SIDE OR HEEL INLET(S). SEE ALSO ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; AND ELBOW, SWIVEL FLANGE TO HOSE.
|
Manufacturer Information:
| G6532-12 | 00624 | EATON AEROQUIP LLC | | G6532-12 | R1120 | SATAIR A/S | | MILF27272 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27065-12 | 50599 | PARKER-HANNIFIN CORP | | MS27065-12 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | GASKET SEAL (HOSE) 2ND END | | CONNECTION STYLE | SWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END 1ST END | | FLOW ANGLE | 90.0 DEGREES | | LEG LENGTH | 2.483 INCHES NOMINAL 2ND END | | LEG LENGTH | 1.376 INCHES NOMINAL 1ST END | | MATERIAL | ALUMINUM ALLOY OVERALL | | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.000 INCHES 2ND END | | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3A 2ND END | | THREAD CLASS | 3B 1ST END | | THREAD SERIES DESIGNATOR | UNEF 2ND END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | THREAD QUANTITY PER INCH | 18 1ST END |
|
|