4730-00-628-7242, BOLT,FLUID PASSAGE

National Stock Number:
4730-00-628-7242

Federal Supply Class:
4730

National Item Identification Number:
006287242

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

537035-5	05812	HORST ENGINEERING & MANUFACTURING CO
537035-5	06725	SPS TECHNOLOGIES, LLC
537035-5	66861	HARTFORD AIRCRAFT PRODUCTS, INC
537035-5	73030	HAMILTON SUNDSTRAND CORPORATION

Techincal Specification:

BODY STYLE	BODY WRENCHING
CONCENTRIC HOLE DIAMETER	0.180 INCHES NOMINAL
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	0.309 INCHES NOMINAL
FIRST DIAMETER FROM WRENCHING FEATURE	1.052 INCHES MINIMUM AND 1.062 INCHES MAXIMUM
FIRST END NOMINAL THREAD SIZE	0.750 INCHES
FIRST END THREAD CLASS	3A
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD LENGTH	0.710 INCHES NOMINAL
FIRST END THREAD SERIES DESIGNATOR	UNF
FIRST END THREAD QUANTITY PER INCH	16
FIRST RADIAL FLUID HOLE DIAMETER	0.144 INCHES NOMINAL
FOURTH DIAMETER FROM WRENCHING FEATURE	0.660 INCHES MINIMUM AND 0.662 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	5.020 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	0.180 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER	4.310 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER	1.680 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER	2.720 INCHES NOMINAL
MATERIAL	STEEL
OVERALL LENGTH	6.170 INCHES MINIMUM AND 6.180 INCHES MAXIMUM
SECOND DIAMETER FROM WRENCHING FEATURE	0.665 INCHES NOMINAL
SECOND END NOMINAL THREAD SIZE	0.312 INCHES
SECOND END THREAD CLASS	3A
SECOND END THREAD DIRECTION	RIGHT-HAND
SECOND END THREAD LENGTH	0.615 INCHES NOMINAL
SECOND END THREAD QUANTITY PER INCH	24
SECOND END THREAD SERIES DESIGNATOR	UNF
SPECIAL FEATURES	WRENCHING END THDS HAS ONE HOLE 0.078IN.DIA THRU
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CADMIUM
THIRD DIAMETER FROM WRENCHING FEATURE	0.758 INCHES NOMINAL
WIDTH ACROSS FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
WRENCHING FEATURE HEIGHT	0.540 INCHES NOMINAL
WRENCHING FEATURE STYLE	HEXAGON

Click here to Register for Free 30-day Trial