|
|
|
National Stock Number:
4820-00-273-8918
Federal Supply Class:
4820
National Item Identification Number:
002738918
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 5000S4824-1385541 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-1385541-082 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-1385541-082AF | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 922 BODY | | NICKEL ALLOY FLOW CONTROL DEVICE | | NICKEL ALLOY SEAT | | NICKEL ALLOY STEM | | STYLE DESIGNATOR | ANGLE FLANGED ENDS | | FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 9.750 INCHES | | SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 9.750 INCHES | | VALVE SIZE | 8.000 INCHES | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 425.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | FLANGE 1ST END | | FLANGE SHAPE | ROUND WITH HOLES 1ST END | | NOMINAL OUTSIDE DIAMETER | 12.375 INCHES 1ST END | | NOMINAL THICKNESS | 0.675 INCHES 1ST END | | BOLT HOLE QUANTITY | 14 1ST END | | BOLT HOLE NOMINAL DIAMETER | 0.688 INCHES 1ST END | | BOLT CIRCLE NOMINAL DIAMETER | 11.062 INCHES 1ST END | | FLANGE FACE DESIGN | PLAIN 1ST END | | RENEWABLE SEAT RING TYPE | THREADED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | BONNET ATTACHMENT METHOD | BOLTED | | FEATURES PROVIDED | BONNET PACKING | | TEST DATA DOCUMENT | 80064-5000S4824-1385541 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|