|
|
|
National Stock Number:
4820-00-813-0604
Federal Supply Class:
4820
National Item Identification Number:
008130604
Description:
VALVE,SAFETY RELIEF
Detail:
A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.
|
Manufacturer Information:
| 2077-71 | 10018 | AVAHO ACQUISITION CORP DBA IMPAC | | 5432-200LB | 28193 | HENRY TECHNOLOGIES, INC. | | 5454 1-2IN | 28193 | HENRY TECHNOLOGIES, INC. | | 5454-200LB | 28193 | HENRY TECHNOLOGIES, INC. | | A15504 | 41947 | MUELLER BRASS |
|
Techincal Specification:
| VALVE OPERATION METHOD | AUTOMATIC | | MATERIAL | COPPER ALLOY BODY | | COPPER ALLOY FLOW CONTROL DEVICE | | RUBBER SEAT | | FLOW CONTROL DEVICE | POPPET | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 450.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE DISCHARGE FLOW RATE | 25.4 CUBIC FEET PER MINUTE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | PLAIN (PIPE) 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NPT 2ND END | | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END | | 0.500 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | DISK LOADING METHOD | SPRING | | OPENING PRESSURE SETTING | 300.0 POUNDS PER SQUARE INCH |
|
|