|
|
|
National Stock Number:
5305-00-013-3495
Federal Supply Class:
5305
National Item Identification Number:
000133495
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 100-3S6-10 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | 133495 | 12204 | DAIMLER CHRYSLER | | 133495 | 24617 | GENERAL MOTORS CORP | | 25704-281280-40-0 | D1839 | BUNDESAMT FUER AUSRUESTUNG, | | 25704-281280-40-0 | D2692 | KRAUSS-MAFFEI WEGMANN GMBH & CO. KG-WERK KASSEL- | | BCKX1FH1 | 00000 | ORDNANCE CORPS | | D9578-59-5 | 91340 | MET-PRO CORPORATION | | D9578-59A5 | 91340 | MET-PRO CORPORATION | | FFS92TYPE1STYLE2S | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35241-53 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35241-53 | D5589 | FEINMECHANISCHE WERKE MAINZ GMBH | | MS35241-53 | D9893 | LIEBHERR-AEROSPACE LINDENBERG GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.625 INCHES NOMINAL | | HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.546 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|