|
|
|
National Stock Number:
5305-00-533-7013
Federal Supply Class:
5305
National Item Identification Number:
005337013
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| SNT50117-5 | 02310 | PATTONAIR USA INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.246 INCHES MINIMUM AND | | 0.286 INCHES MAXIMUM | | FASTENER LENGTH | 0.662 INCHES MINIMUM AND | | 0.682 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.256 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM | | HEAD HEIGHT | 0.087 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.077 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.396 INCHES MINIMUM AND | | 0.416 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|