|
|
|
National Stock Number:
5305-00-550-4430
Federal Supply Class:
5305
National Item Identification Number:
005504430
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 11484 | 06650 | BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.099 INCHES | | THREAD QUANTITY PER INCH | 48 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.038 INCHES MINIMUM | | FASTENER LENGTH | 0.098 INCHES NOMINAL | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.250 INCHES NOMINAL | | HEAD HEIGHT | 0.020 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FIRST DIAMETER FROM HEAD | 0.118 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | SECOND DIAMETER FROM HEAD | 0.070 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.038 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.060 INCHES NOMINAL |
|
|