|
|
|
National Stock Number:
5305-01-010-2353
Federal Supply Class:
5305
National Item Identification Number:
010102353
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51099-137 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | THREAD LENGTH | 1.275 INCHES MINIMUM AND | | 1.500 INCHES MAXIMUM | | FASTENER LENGTH | 1.438 INCHES MINIMUM AND | | 1.500 INCHES MAXIMUM | | MATERIAL | STEEL COMP 403 OR | | STEEL COMP 405 OR | | STEEL COMP 410 OR | | STEEL COMP 416 OR | | STEEL COMP 416 PLUS X OR | | STEEL COMP 416F OR | | STEEL COMP 416SE OR | | STEEL COMP 420 OR | | STEEL COMP 420F OR | | STEEL COMP 420FSE OR | | STEEL COMP 429 OR | | STEEL COMP 430 OR | | STEEL COMP 430F OR | | STEEL COMP 430FSE OR | | STEEL COMP 431 OR | | STEEL COMP 440A OR | | STEEL COMP 440B OR | | STEEL COMP 440C OR | | STEEL COMP 440F OR | | STEEL COMP 440FSE OR | | STEEL COMP 446 OVERALL | | HEAD STYLE | HEXAGON | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 11 | | THREAD CLASS | 2A | | MATERIAL DOCUMENT AND CLASSIFICATION | FED. STD 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 235.0 BRINELL STANDARD MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 70000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 40000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.378 INCHES MINIMUM AND | | 0.403 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.922 INCHES MINIMUM AND | | 0.938 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.094 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND | | 10P STYLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-S-85 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS51099-137 |
|
|