5305-01-069-5978, SCREW,EXTERNALLY RELIEVED BODY

5905-01-069-5977 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5305-01-069-5978

Federal Supply Class:
5305

National Item Identification Number:
010695978

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

6114-SS-2528-7	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6114-SS-2528-7	1YGB8	CAREY MANUFACTURING CO, INC
76872-60	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

CRITICALITY CODE JUSTIFICATION	ZZZY
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.745 INCHES MINIMUM AND 0.764 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
HEAD HEIGHT	0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial